Please note: the forum is closed.
No new user registrations are accepted. For more info, please click here.
No new user registrations are accepted. For more info, please click here.
A1 heat break PTFE diameter?
vintageb3
Posts: 5Member
Hi Guys. I bought a second hand A1 a week ago or so. It’s in good condition with only a couple of issues. The Z rods have had a treacle like grease applied which makes the Z axis sluggish when it’s cold. I will strip that grease off. With my first test print, I got a clog. So, I thought I’d start with a clean slate and ordered Capricorn tube to put a new heat break liner. I downloaded the jig to cut the liner to length. So I stripped the hot end and removed the liner to discover It’s not the same dimensions as the Capricorn bowden tube. It’s a thinner OD plus it’s shorter than the jig I downloaded from Thingieverse. The liner is about 15.4mm long and 3.03mm diameter. Can someone tell me the correct dimensions please? Thanks in advance!
Howdy, Stranger!
RegisterIt looks like you've been lurking for a while.
If you register, we will remember what you have read and notify you about new comments. You will also be able to participate in discussions.
So if you'd like to get involved, register for an account, it'll only take you a minute!