Please note: the forum is closed.
No new user registrations are accepted. For more info, please click here.
No new user registrations are accepted. For more info, please click here.
Endstops
JackP
Posts: 1Member
My A5 has an issue. The X & Z endstops stay triggered all the time. I've ran PronterFace M119 and it shows both triggered, manually closed switches with no change. I've checked continuity between plugs and switches and both tested and working when pressed. I'm at a loss on what to check next. Please help. Thanks
Post edited by Samuel Pinches on
Comments
Hi @JackP , sorry I missed your post, it was in the "Print Lounge" category, and I have now moved it to the troubleshooting category.. It sounds like a fault with the motherboard. If you replace the MKS Gen L that should resolve it. You could also try swap the X and Y endstop plugs to doubly confirm that it is the motherboard fault, and not an endstop fault.
Howdy, Stranger!
RegisterIt looks like you've been lurking for a while.
If you register, we will remember what you have read and notify you about new comments. You will also be able to participate in discussions.
So if you'd like to get involved, register for an account, it'll only take you a minute!