Please note: the forum is closed.
No new user registrations are accepted. For more info, please click here.
No new user registrations are accepted. For more info, please click here.
Hot end crashing into bed after levelling.
if I level the bed using the lcd levelling screen when I go to print the nozzle crashes into the bed causing me to abort print. the same happens if I level the bed using the z home option, its almost as if there are two z home positions.
I hoped updating the firmware on the main board would solve it however it has not.
Would updating the lcd firmware make any difference in this situation or could it be somethingelse?
Many thanks in advance
I hoped updating the firmware on the main board would solve it however it has not.
Would updating the lcd firmware make any difference in this situation or could it be somethingelse?
Many thanks in advance
Comments
How that works I described here: https://jgmakerforum.com/discussion/421/cura-profile-for-the-a5-and-explanations-for-the-individual-settings#latest
Howdy, Stranger!
RegisterIt looks like you've been lurking for a while.
If you register, we will remember what you have read and notify you about new comments. You will also be able to participate in discussions.
So if you'd like to get involved, register for an account, it'll only take you a minute!