Please note: the forum is closed.
No new user registrations are accepted. For more info, please click here.
No new user registrations are accepted. For more info, please click here.
Y axis not working
Jon Mathis
Posts: 2Member
I did not use my A5 for about a month because I was waiting for new parts to rebuild the print head. Parts finally came I rebuilt the head and now for some reason, the Y-axis will not move at all anymore. Took it apart to see if there were any loose connections but no so I went wire by wire on the outside connectors to make sure they were all seated properly and still nothing I do know that the little stopper switch does work properly but can seem to find any reason why the stepper motor would just stop working due to it not being used for a month idk.
Comments
I suggest to test your y endstop using M119 and pronterface. If that works, try plugging in the Y motor into the X motor socket and see if it works then.
Howdy, Stranger!
RegisterIt looks like you've been lurking for a while.
If you register, we will remember what you have read and notify you about new comments. You will also be able to participate in discussions.
So if you'd like to get involved, register for an account, it'll only take you a minute!