Please note: the forum is closed.
No new user registrations are accepted. For more info, please click here.
No new user registrations are accepted. For more info, please click here.
one way only movements
gary74
Posts: 7Active Member
recently I replaces my MKS. GEN V1.0 BOARD & MY MKS TFT28 V3.0 After flashin with the older 201 april 16 malrin in my arduino. I get no movement in any negative direction. I get movement in the positive directions but no return. I have tried checking all wiires and connectors. What am I missing? Please help. I have new motor stepper drivers coming but I want all else up to par. Someon please leae me some kind of way to identify why this will not move in the return or negative directions.
Comments
If I move the y table below it will move it in the right direction. I also can move the x axis as long as it is in just the positivge direction. .
I recentely had this machine given to me because it had stopped working. I found the power supply was out. I replaced it Then I had no screen when it was hooked up and bought a new mks tft28 touch screen. I got it on and flashed it with the latest version in the JG wiki and nothing would move.
I got a new board. MKS GEN_L VG1.0 BOARD.
Then I checkeck ed the voltage on the motor steppers. All seemed in good ranges. It moved the z axis up and I noticed the axis was not level and then noticed that it did not have the 4.mm set screws in either. I got those yesterday. I finally checked all the wire plugs and put it all back together. I cannot find a loose or unplugged connection. I have learned a lot thru the videoes of various people. I looked at the basics on the board.
Ihavre ordered and await new stepper motor drivers. TMC2208. I am now wondering if i need to get new harnesses for the whole the thing.
Howdy, Stranger!
RegisterIt looks like you've been lurking for a while.
If you register, we will remember what you have read and notify you about new comments. You will also be able to participate in discussions.
So if you'd like to get involved, register for an account, it'll only take you a minute!