Please note: the forum is closed.
No new user registrations are accepted. For more info, please click here.
No new user registrations are accepted. For more info, please click here.
Just added the A5 to my collection
Ap3rc0
Posts: 1Member
Hello everyone.
Got an A5 a few weeks ago to handle my larger prints. For the most part, I'm pleasantly surprised with the out of the box performance. I've updated the firmware and made a few minor tweaks to the machine. I have a very large print going right now. Printing PETG at 250 c. I'm trying to test the limits of the machine. The print speed I've set is 70 across the board. It seems to be experiencing slippage on the long Strait lines of the outer shell. It's more of an annoyance really. It's almost as if the filament feed calibration is off at this speed. Has anyone experienced this type of issue? And what's the fastest print speed you've been able to get out of this thing at draft quality?
Got an A5 a few weeks ago to handle my larger prints. For the most part, I'm pleasantly surprised with the out of the box performance. I've updated the firmware and made a few minor tweaks to the machine. I have a very large print going right now. Printing PETG at 250 c. I'm trying to test the limits of the machine. The print speed I've set is 70 across the board. It seems to be experiencing slippage on the long Strait lines of the outer shell. It's more of an annoyance really. It's almost as if the filament feed calibration is off at this speed. Has anyone experienced this type of issue? And what's the fastest print speed you've been able to get out of this thing at draft quality?
Howdy, Stranger!
RegisterIt looks like you've been lurking for a while.
If you register, we will remember what you have read and notify you about new comments. You will also be able to participate in discussions.
So if you'd like to get involved, register for an account, it'll only take you a minute!