Please note: the forum is closed.
No new user registrations are accepted. For more info, please click here.
No new user registrations are accepted. For more info, please click here.
First Print with JGMaker Magic
HaimZ
Posts: 1Member
Hello Guys,
I just printed my first model with the JGMaker Magic and PLA,
on a mirror surface.
I just printed my first model with the JGMaker Magic and PLA,
on a mirror surface.
- Printing Temperature: 200 °C
- Bed Temperature: 60 °C
- Speed: 50 mm/s
- Layer height: 0.15 mm
- Infill: 20%
- Initial Layer Speed: 20 mm/s
One of the corners and it's side rib came out not as even as the other three.
What do you think can cause this?
Thanks in advance,
Haim
Haim
Comments
Howdy, Stranger!
RegisterIt looks like you've been lurking for a while.
If you register, we will remember what you have read and notify you about new comments. You will also be able to participate in discussions.
So if you'd like to get involved, register for an account, it'll only take you a minute!