Home JGAurora A5 & A3S Modifications & Upgrades

JGAurora A5 - Linear rail X - MGN12 - H

Good afternoon,
This is my Project to convert the x axis to linear rail.

Comments

  • jsanchjsanch Posts: 11Member
    edited May 2020
    This is the Beta phase.
    I'd use a mgn12 -h with 400mm length





    and I'd include a belt tensioner

    It's for a BMG extruder in direct drive.


    Post edited by jsanch on
  • Samuel PinchesSamuel Pinches Posts: 2,997Administrator
    edited May 2020
    Looking good! Will you do E3D V6 as well? Edit: saw the photo .... awesome!! :smiley:
    Post edited by Samuel Pinches on
  • jsanchjsanch Posts: 11Member
    edited May 2020
    I'll try to make it the most compact possible




    The dimensión are:
    X: 270mm
    Y: 285mm
    Z: 260mm
    I'll trying it and is in beta but it Works!!!
    Post edited by jsanch on
  • jsanchjsanch Posts: 11Member
    edited May 2020
    The components are:
    -E3d V6
    -Bondtech extruder (right or left) I'd mount the right version and it Works well but i think the left version is better.
    -Nema 17 pankcake 24mm.
    -30mm barrel fan
    -5015 24v layer fan
    -MGN12 - H 400mm

    The x nema motor, gt2 pulleys and belt are the original of the printer.
    Thanked by 1Samuel Pinches
    Post edited by jsanch on
  • Samuel PinchesSamuel Pinches Posts: 2,997Administrator
    I've moved it into the A5 section as requested - but I think this would also work on the A5S too! :smile:
    Thanked by 1Gandy
  • techy121592techy121592 Posts: 1Member
    Do you know what it will take to make this compatible with the E3D Titan extruder?
  • DerfDerf Posts: 2Member
    edited April 2021
    Hi jsanch,

    Are you still happy with this mod one year later?

    I'm thinking to do the same on my own.

    Best regards,

    Derf;-
    Post edited by Derf on
  • FurbaFurba Posts: 2Member

    Hello, please help your fashion JGAURORA A5-A5S - LINEAR RAIL X - MGN12H
    I collected this mod with Bltouch, please help with the firmware of this fashion! I can not configure Configuration files
    I installed the TMT 2208 and it seems like everything is fine
    But Blotouch can not customize!

Sign In or Register to comment.