Home› JGMaker Magic
Please note: the forum is closed.
No new user registrations are accepted. For more info, please click here.

First Print with JGMaker Magic

HaimZHaimZ Posts: 1Member
in JGMaker Magic
Hello Guys,

I just printed my first model with the JGMaker Magic and PLA,
on a mirror surface.
  • Printing Temperature: 200 °C
  • Bed Temperature: 60 °C
  • Speed: 50 mm/s
  • Layer height: 0.15 mm
  • Infill: 20%
  • Initial Layer Speed: 20 mm/s

One of the corners and it's side rib came out not as even as the other three.
What do you think can cause this?

Thanks in advance,
Haim


Comments

  • jonathangrecojonathangreco Posts: 3Member
    Looks like your bed is not level. 
  • ZelZel Posts: 24Member
    that's your seam. what's your retraction settings? Z-raise per layer? which axis does the uneven side from? X or Y?
    Thanked by 1Samuel Pinches
  • Samuel PinchesSamuel Pinches Posts: 2,997Administrator
    edited May 2021
    Welcome @HaimZ
    @Zel is correct -- that is the Z seam.
    Post edited by Samuel Pinches on
Sign In or Register to comment.