Toggle navigation
Categories
Discussions
Activity
🔨Firmware
🧰Starter Kit
💡Wiki
🛒Shop
Sign In
Home
Please note: the forum is closed.
No new user registrations are accepted. For more info, please click here.
Back to Profile
eyes
About
Username
eyes
Joined
July 2019
Visits
329
Last Active
April 2021
Roles
🌟 Super Member 🌟
Location
United States of America
Thanked
13
What model of 3D printers I own (optional):
A5S, AM8
Posts
70
Activity
Thanked
13
Discussions
3
Comments
67
I would try M851 from a terminal in Pronterface before you reflash anything to see if it's set to anything other than zero. If you flash new firmware it will change it to zero - I think - unless it i…
Thanked by
1
doublehead
Have you checked to make sure the x axis is level? Maybe one of the z axis motors is out of alignment with the other one. That happened to me and I had similar problems with it grinding against the b…
Thanked by
1
doublehead
Marlin 2.0.1 is out and one of the patches listed is "<span>Fix STEP Pulse timing to prevent missed steps"
Here is the new version. I haven't tested it yet but maybe it will help in additio…
Thanked by
1
Samuel Pinches
I had the same problem but not that high. I had the problem with the previous version too. I think its related to speed and acceleration. I just reprinted mine and set acceleration on X and Y to 300…
Thanked by
1
Samuel Pinches
This mod will keep the hotend cooling fan off until it reaches 50C. You will need a relay and DC buck converter. I am using this buck converter <a rel="nofollow" href="https://www.amazon.com/gp/pr…
Thanked by
1
Samuel Pinches
Marlin 2.0.0 stable has been released - its no longer considered beta!
I created a new firmware with the newest Marlin 2.0.0 files. I was able to upload to my printer but have not tested it. …
Thanked by
1
Samuel Pinches
If you want a cleaner look I can make you a short circuit wire to plug in that would do the same thing. I have lots of those 3 pin connectors. Send me a message with your address if you would like on…
Thanked by
1
Samuel Pinches
I'm pretty sure its the red and black wire with the white plug. There is a white label on the black wire that should say B1. The other 3 wires plugged in next to it (red,blue, and green plugs) are yo…
Thanked by
1
Samuel Pinches
Hi razai. I cant remember what color it is but if you have your machine apart and can send a picture of the board with connections I think I can help you. I think it is possible to disconnect it at t…
Thanked by
1
Samuel Pinches
As it turns out I had the board upside down when I damaged the solder point so PF4 was ok, I resoldered and BLTouch is working perfectly. Thank you Frezap and Samuel for all your help!
Thanked by
1
Samuel Pinches
Thank you. If I get it working I'll add instructions in case anyone else wants to set it up.
Thanked by
1
Samuel Pinches
So PD7 orange wire and PG0 white wire ( I think the white and black are the same as the 2 wires on the microswitch). I will look at my file for the first one but I know I don't have 2-4 set. I've nev…
Thanked by
1
Samuel Pinches
I have done that before but with instructions for the board I was using. I think I may be able to figure it out. I'll update here if I'm successful. Thank you for your help.
Thanked by
1
Samuel Pinches