Home› JGAurora A5 & A3S› Getting Started & Troubleshooting
Please note: the forum is closed.
No new user registrations are accepted. For more info, please click here.

Money Cat from USB fine, but nothing else sticks to bed

krmurrellkrmurrell Posts: 1Member
in Getting Started & Troubleshooting
Given the supplied files generally work (and I have several cats now), but models I produce from Cura fail - generally not sticking to the bed - is my best bet to compare the GCode between the cat sample and the gcode I am producing?  I presume the top section of the gcode is the most relevant for my problems.  Advice gratefully received!

Comments

  • Samuel PinchesSamuel Pinches Posts: 2,997Administrator
    Welcome @krmurrell !
    Please have a look at the suggestions on the FAQ page:
    https://jgaurorawiki.com/a5/faq#problemmy-prints-will-not-stick-to-the-bed
  • danlott71danlott71 Posts: 1Member
    edited September 2018
    I recently got my first printer and had the same issue.  What I found out was that I had the wrong filament size (compatible diameter material) set in the printer nozzle settings in Cura.  The filament size was set to large, so it was not extruding enough filament. 
    Post edited by danlott71 on
  • AlexAlex Posts: 4Member
    By the way...
    Recently I had trouble with Cura 3.5 filament diameter. I had "under extrusion" behavior.  Cura used diameter from material definition (I guess), and just ignored machine settings (In my case I have 1.75).  Only setting diameter from the right bar manually to 1.75 solved this issue for me. I don't know is this a bug or just lack of lucky.
     
    Thanked by 1Samuel Pinches
Sign In or Register to comment.