Please note: the forum is closed.
No new user registrations are accepted. For more info, please click here.

JGMaker Magic

In the budget printer category, the JGMaker is a great easy-to-use beginner printer delivering excellent print quality at an affordable price. Released early 2019.

Magic Firmware Marlin 2.0 Error

661 views 9 comments 0 points Most recent by Samuel Pinches January 2022
Mainboard upgrade SKR v2.0

390 views 6 comments 0 points Most recent by Euzziel November 2021
Semi auto leveling feature in new Magic

379 views 10 comments 0 points Most recent by Euzziel November 2021
Holes in first layer

106 views 4 comments 0 points Most recent by Euzziel August 2021
Any help is appreciated

204 views 9 comments 0 points Most recent by Samuel Pinches August 2021
JGMaker Magic - Issues with pulleys and belt

242 views 1 comment 0 points Most recent by Euzziel August 2021
Extruder driver not working?

325 views 3 comments 0 points Most recent by Samuel Pinches July 2021
unable to home the extruder

51 views 1 comment 0 points Most recent by Samuel Pinches July 2021
-14 Nozzle Temp: E1 heating failed, printer halted, please reset

5.1K views 3 comments 0 points Most recent by RonArt June 2021
JGMaker Magic and BLTouch

607 views 5 comments 0 points Most recent by Euzziel June 2021
Can't seem to level glass bed

288 views 0 comments 0 points Started by Infuze92 June 2021
Board for the Magic?

256 views 1 comment 0 points Most recent by Samuel Pinches June 2021
dislays goes off

56 views 1 comment 0 points Most recent by Samuel Pinches June 2021
Frame bent

66 views 1 comment 0 points Most recent by Samuel Pinches May 2021
First Print with JGMaker Magic

250 views 3 comments 0 points Most recent by Samuel Pinches May 2021
Please help with bed levelling

256 views 4 comments 0 points Most recent by Eye May 2021
Not going through the Auto Home feature at start up.

220 views 1 comment 0 points Most recent by Samuel Pinches May 2021
Flexible with Magic?

467 views 12 comments 0 points Most recent by Eye April 2021
Z Axis

303 views 4 comments 0 points Most recent by Samuel Pinches April 2021
Another revised upgrade

231 views 0 comments 0 points Started by Euzziel April 2021
Nozzle 0.8mm settings? [Edit: Finally I used the 0.6mm nozzle]

1.2K views 1 comment 0 points Most recent by printcrafter April 2021
Z movement is way off

219 views 3 comments 0 points Most recent by y2kats65 April 2021
Leveling went wrong

134 views 1 comment 0 points Most recent by Samuel Pinches March 2021
Display in Chinese

51 views 2 comments 0 points Most recent by jpalterman March 2021
Printer failed to resume after a power failure

222 views 2 comments 0 points Most recent by Samuel Pinches March 2021
How to replace extruder nozzle?

205 views 4 comments 0 points Most recent by y2kats65 March 2021
Printer won't heat up automatically

163 views 5 comments 0 points Most recent by Samuel Pinches March 2021
X-axis Carrier

83 views 0 comments 0 points Started by Zel March 2021
Magic main board swap

340 views 1 comment 0 points Most recent by Zel March 2021
Magic: Main wire harness

268 views 10 comments 0 points Most recent by Zel March 2021

JGMaker Magic

Discussion List