Replacement Surface Headbed

Leon · April 2020

Hello guys,

i destroyed the surface.. where can i buy a new one?
235mm x 235mm

Leon · April 2020

here are the pics:

Image: https://jgmakerforum.com/uploads/editor/hh/nzn70rk6m6at.jpg

Image: https://jgmakerforum.com/uploads/editor/sd/ot6ufpuwekdi.jpg

Stephen Todd · April 2020

Its just a PVC mat - you can buy something like it from Amazon, eBay, aliexpress, etc. - even cut them down to size

A good opportunity to upgrade to a PEI sheet 1mm or 2mm thick - people say they are much better - but I don't know for sure - I've got the infamous black diamond non-stick surface

Stephen Todd · April 2020

PS. I think you are meant to remove the mat from the printer then flex it to get the parts off easily - that's what you do with a PEI sheet

Leon · April 2020

Thank you Stephen, i have liked to have the jgmaker logo but i think ill try this:
3pcs:
https://www.amazon.de/BUYGOO-Druckplatte-Oberfl%C3%A4che-Wiederverwendbare-Klebefl%C3%A4chenplatte/dp/B07Q3TLZQQ/ref=sr_1_7?__mk_de_DE=%C3%85M%C3%85%C5%BD%C3%95%C3%91&dchild=1&keywords=oberfl%C3%A4che+235x235&qid=1585997980&sr=8-7

The Buildtak is more expensiv...its only 1pcs.
https://www.amazon.de/BuildTak-254x254-Druckbett-Beschichtung-3D-Drucker-Dauerdruckplatte/dp/B07RYMK9H8/ref=sr_1_3?__mk_de_DE=%C3%85M%C3%85%C5%BD%C3%95%C3%91&dchild=1&keywords=buildtak&qid=1585998070&sr=8-3&th=1

thx for the fast comment
greetings from germany

Stephen Todd · April 2020

Yes, its all the same stuff - but personally I would not want a stick down mat - I'd go for a removable mat - and remove the parts by flexing the mat

A lot of people like using a mirror tile or sheet of glass and clips - but you then need to coat the mirror with dilute PVA adhesive to get the parts to stick - but you get a nice shiny base layer

alleriodrone · April 2020

I have long since swapped to spring steel mats from Amazon with a magnetic surface below. I have tried several and like the one with a stick on pei surface the best but both of the ones liked here work alright. I would just say that the powder coated one requires glue sticks while the other one does not.

Powder coated one: FYSETC Upgrade 3D Printing Build... https://www.amazon.com/dp/B07W41GSBS?ref=ppx_pop_mob_ap_share

PEI surface: Two Trees Removal Spring Steel Sheet Pre-Applied PEI+Flex Magnetic Hot Sticker 235X235mm for 3D Printer Heat Bed https://www.amazon.com/dp/B07W4K71F6/ref=cm_sw_r_cp_apap_F7bJ2G2I2Rz8d

Replacement Surface Headbed

Comments