Toggle navigation
Categories
Discussions
Activity
🔨Firmware
🧰Starter Kit
💡Wiki
🛒Shop
Sign In
Home
Please note: the forum is closed.
No new user registrations are accepted. For more info, please click here.
Back to Profile
chainbreaker2012
About
Username
chainbreaker2012
Joined
July 2019
Visits
81
Last Active
August 2019
Roles
Member, 🌟 Super Member 🌟
Location
United States of America
Thanked
10
What model of 3D printers I own (optional):
JGAURORA A5S
Posts
30
Activity
Thanked
10
Discussions
6
Comments
24
left is what I was having issues with right is new w/ prusaslicer
Thanked by
1
Samuel Pinches
<div>@WidgetElgie here is what I did to fix the center warping on mine. It hasn't eliminated it but it did help alot<img src="https://jgmakerforum.com/uploads/editor/hm/ry1ts6ltebs1.jpg" alt…
Thanked by
2
WidgetElgie
Samuel Pinches
Oh and I got tpu printing great! it was surprisingly cura causing it. I transferred my settings from cura to prusaslicer and the problems have basically gone away.
Thanked by
1
Samuel Pinches
decided to go ahead and modle one after one i found on thingiverse for the cr-10s
Thanked by
1
Samuel Pinches
i had the same issue with the print bed but depending on how bad it is the comunity firmware has mesh leveling that will probably sort it for you. takes a bit longer but it levels the bed at 25 diffe…
Thanked by
2
Brushie
Samuel Pinches
WidgetElgie, I had same issue with mine, I used a perimeter of painters tape on the outside of my glass and that helped a bit with the center warp (guessing because it warms the bed more evenly) also…
Thanked by
1
WidgetElgie
Thanks again Samuel!
Thanked by
1
Samuel Pinches
<div>Thank you Samuel Pinches. I figured it may have something to do with the clips. I may just go back to using painters tape. I have a set of feelers at in my shop that I may bring in so I ca…
Thanked by
1
Samuel Pinches