Home JGMaker Magic

Leveling went wrong

fadeisherefadeishere Posts: 1Member
So i leveled the bed wrong yesterday and gouged the bed. Any links to replacement beds? I guess glass would be the way to go just want to get the right one. Preferably withen the states so i can get it in a reasonable amount of time. Thank you.

Comments

  • Samuel PinchesSamuel Pinches Posts: 2,997Administrator
    edited March 2021
    Welcome to the forum -- sorry to hear about your bed. :disappointed:
    The bed glass is cheap enough -- just use one of the CR10 ones that are the same 310mm square, like this: https://amzn.to/3svjRJj
    Most likely the bed will be fine to continue using! However, the nozzle is likely to have been severely damaged, depending on how much grinding there is. Please read up the instructions from JGAurora carefully before replacing it -- if you just put a wrench to the nozzle you WILL 100% snap the hot-end throat, that connects the heater block and the x-carriage. The heat block needs to be held and supported while undoing the nozzle, to prevent stress on the thin metal throat.
    Post edited by Samuel Pinches on
Sign In or Register to comment.