Please note: the forum is closed.
No new user registrations are accepted. For more info, please click here.
No new user registrations are accepted. For more info, please click here.
Can't heat hot end (Error Heating Failed...)
Rubymania
Posts: 1Member
I can't heat A5 hot end above 185 C (fail around 178C ~ 185C) .
I changed old thermister, heat cartridge (24V 30W) to new one. (change several times but same situation)
I bought it from jg aurora official store in Aliexpress!
And also change firmware configuration (WATCH_TEMP_PERIOD 60)
Hot end temp. go up very slowly (take about 10 min to 180) and fail...
Can you please help me to resolve this problem?
What if I change to 24V 40W heat cartrage?
I changed old thermister, heat cartridge (24V 30W) to new one. (change several times but same situation)
I bought it from jg aurora official store in Aliexpress!
And also change firmware configuration (WATCH_TEMP_PERIOD 60)
Hot end temp. go up very slowly (take about 10 min to 180) and fail...
Can you please help me to resolve this problem?
What if I change to 24V 40W heat cartrage?
Comments
is the cooling fan blowing on the nozzle? Bed heats fine? Is the heater cartridge fully inserted into the heater block? Very odd!
Howdy, Stranger!
RegisterIt looks like you've been lurking for a while.
If you register, we will remember what you have read and notify you about new comments. You will also be able to participate in discussions.
So if you'd like to get involved, register for an account, it'll only take you a minute!