Settings and Configurations

Hevilp

Hi,

what you think about to post here (the exported settings) the configs and settings for different programs such as Ultimaker Cura, repetier host, s3d and so on. 

I got Problems to set the configuration for rep host.

Kind regards 

Samuel Pinches

Please, all discussion is welcome! 😀 But, if you can post a photo of your print,  we can give you specific suggestions for improving the print quality.

Hevilp

My print quality is good, but what are the borders with the speed etc? I use the normal 60mm/s and nothing changed except temperature 215/63 for PLA.

I still think a database is a good idea

Samuel Pinches

Ok, have a look here- there is a link to github where people a putting together a range of profiles to download:
https://jgaurorawiki.com/a5/printing-profiles

Every printer is slightly different, so results may vary slightly.

Hevilp

Where to put the 

https://github.com/ceakins/3d-Printer-Profiles/blob/master/cura/Material-Templates/JGAurora/A5/PLA-JGAurora-A5.curaprofile

?

Hevilp

https://ultimaker.com/en/resources/20441-manage-profiles

I found the solution

BlackboardIdeas

HI, I'd like to ask you for help, I'd like to improve my print quality with 0.2mm layer printing and better settings, so here is a picture of my model:
https://photos.google.com/photo/AF1QipMYTD3pc7ylUxSifqwPIR_bsrSaPiZrispqkYKp?hl=cs
those lines that have darker color are I think missing layers so do you think that I should increase the flow?
Here are pictures if my settings if anyone is intersted:
https://photos.google.com/photo/AF1QipOqhA5t4CM_ptBcBREh_VnIMMelemCSq5qmfg_B?hl=cs
https://photos.google.com/photo/AF1QipPro5gPhY_furx4A-S2Bry79Cp3n4UPPDFYcVLR?hl=cs
https://photos.google.com/photo/AF1QipObRa-YkSLpfFO3rfGHUKak-NSylXuHHzi0MagJ?hl=cs
https://photos.google.com/photo/AF1QipOcIpUAU0diJlcb2xgAarhLBrLsdilYP-hICM1e?hl=cs
https://photos.google.com/photo/AF1QipO6TZwfoH2bz2Bs8cUXKtrYwbbJOZdzktjplgOs?hl=cs
https://photos.google.com/photo/AF1QipO__OowyyMvbQxjx8qrOcXeCMmUoNdu4AxaxBH0?hl=cs
It's quite good, but I know that it can be better. Please help me and feel free to ask me any additional info about the filament or anything else.
Thank you.

Samuel Pinches

Hi @BlackboardIdeas ,

Unfortunately we can't access those images. They seem to be temporary image URLs, not suitable for sharing.

Kind regards,
Sam

Daniel Marc Ehrhardt

Could you again share your Printer Settings?
print speed:
Temperature:
Plate Temperature:
Retraction Distance:
Retraction Speed: