Home› JGAurora A5 & A3S› Getting Started & Troubleshooting
Please note: the forum is closed.
No new user registrations are accepted. For more info, please click here.

New LCD firmware filament retraction problem

SystemSystem Posts: 19Administrator
in Getting Started & Troubleshooting
This discussion was created from comments split from: FAQ: Getting Started & Troubleshooting.

Comments

  • philwald1184philwald1184 Posts: 28🌟 Super Member 🌟
    I'm wondering why the filament option on A5 with new LCD firmware wont retract when changing. Will only lift off print but won't retract at same time. Or isnt that what its supposed to do?
  • Samuel PinchesSamuel Pinches Posts: 2,997Administrator
    Hi @philwald1184,
    I’m not sure I understand the problem. When you use the LCD change filament option, are you saying that it does not reverse the filament out of the tube?

    I’ll test in on my printer in the next day or so. 
  • philwald1184philwald1184 Posts: 28🌟 Super Member 🌟
    No.  Its not auto retracting before it lifts away from print. Unless its not supposed too.  Yes, after its lifted away from print I can retract using buttons. I just assumed it should perform a retraction before that
  • Samuel PinchesSamuel Pinches Posts: 2,997Administrator
    Oh, so changing the filament mid print? This LCD firmware from Karl is based of a more recent LCD firmware direct from MKS. I’ll be releasing a JGAurora based LCD firmware in the next few days, and will ask you to test it and see if it fixes the problem you’re having.
  • serial59serial59 Posts: 1Member
    meme souci que j'ai eu et meme en pause un ce lève et c'est tout de déplace pas et rétracte pas
  • lsh60lsh60 Posts: 38🌟 Super Member 🌟
    edited March 2018
    Hola a todos.
    Tengo una A5 y quisiera eliminar el sonido molesto (beep beep) que produce la impresora en las retracciones de la alimentación de filamento.
    Hay forma en Marlín, de eliminar el sonido de la retracción que produce el altavoz.
    Espero vuestra ayuda.
    Saludos.
    Luis.
    Post edited by lsh60 on
  • Samuel PinchesSamuel Pinches Posts: 2,997Administrator
    @lsh60 - its is not the speaker! It is the stepper motors. They can be quite musical sometimes. The fix is to replace A4988 stepper drivers with TMC2100 or TMC2130 stepper drivers.


  • Samuel PinchesSamuel Pinches Posts: 2,997Administrator
    edited March 2018
    Here is a new LCD firmware for the A5 & A3S - this is based off the official JGAurora firmware from Jan 11th. The only changes are the addition of baby stepping and mesh bed levelling buttons.

    Download community LCD firmware for JGAurora A5
    Download community LCD firmware for JGAurora A3S

    @philwald1184 - can you please try this and see if it fixed the issue? You can also try the original older official JGAurora A5 LCD firmware here, or the untouched newer firmware here.

    Post edited by Samuel Pinches on
  • philwald1184philwald1184 Posts: 28🌟 Super Member 🌟
    Ok thanks!
  • lsh60lsh60 Posts: 38🌟 Super Member 🌟
    Hola a todos.
    He instalado el nuevo firmaware del LCD en mi A5.
    Sabe alguien como se configura la pantalla de la impresora en el idioma español.
    Espero vuestra respuesta.
    Saludos.
  • Samuel PinchesSamuel Pinches Posts: 2,997Administrator
    @lsh60
    I will make a multilanguage firmware version for you in the next few days. I think spanish is supported. 
    Thanked by 1lsh60
  • hugoczhugocz Posts: 17Member
    @Samuel Pinches
    Its any tutorial how to change the lcd firmware the mesh bed leveling options is something im really interested
  • Samuel PinchesSamuel Pinches Posts: 2,997Administrator
    Hi @hugocz
    Have a read here first:
    http://jgaurorawiki.com/a5/lcd-firmware
    Kind regards, 
    Sam
  • hugoczhugocz Posts: 17Member
    @Samuel Pinches
    I was looking there only saw the board, thank you for your help
Sign In or Register to comment.