Please note: the forum is closed.
No new user registrations are accepted. For more info, please click here.
No new user registrations are accepted. For more info, please click here.
Search
-
Problems compiling source code
-
MKS PWC V2.0 auto off after printing end with A5
hi everyone i get a MKS PWC V2.0 and i mange to make it work with my A5. after so many trying & field in 4 days and i can see that a lot of users had some problem so i will make my experience available for any one how need it. so the wiring diagram this for an old mks bord and tft but it will be the same pins on the MKS… -
[Working] Automatically turn on the hotend cooling fan when hot.
I am trying to set the extruder cooling fan to turn on when the extruder reaches a certain temperature. This is how you do it: ****************************************************************************************************************************** // Extruder cooling fans // Configure fan pin outputs to… -
New Lead screw for Z axis
-
Automatic bed leveling settings
Hi, I have added BLtouch and trying to understand how works the probe grid setup.Marlin 1.1.9 and #define AUTO_BED_LEVELING_UBL I have the sensor pin 36mm behind and 6mm to the right from the nozzle.#define X_PROBE_OFFSET_FROM_EXTRUDER 6 // X offset: -left +right [of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 36 // Y… -
help with "USE_CONTROLLER_FAN"
Hi I am in a process of upgrading the stepper drivers to tmc2208 and wanted to use the USE_CONTROLLER_FAN option so the fan will only kick in when the motors are active I tried to use the HE1 (#define CONTROLLER_FAN_PIN 7) on the board to run a fan since i have a 12V fan I configured the CONTROLLERFAN_SPEED 127 checked… -
Re: A5 – BLtouch goes off the bed during UBL bed leveling
-
Re: Firmware
Welcome @bhjt1728 - what was the old motherboard value, and what did you change the new one to? The standard A5 motherboard is the MKS Gen L (not the SGen L, please don't confuse them) It should be changed in configuration.h from: #define MOTHERBOARD BOARD_MKS_GEN_L to #define MOTHERBOARD BOARD_MKS_13 Hope this helps. The… -
Change Language on MKS TFT
From a question received via email: Hello, i have problem to set german language. In Marlin/Configuation.h: #define LCD_LANGUAGE de #define DISPLAY_CHARSET_HD44780 WESTERN In Custom LCD firmware v3.03, mks_config.txt: #multi-language(enable:1, disable:0)cfg_multiple_language:1 #languages setting #(simplified Chinese:1;… -
Upgrades to my A5 - BLtouch, controller fan and cold end fan control
So I set out to do these upgrades and it took me WAY to long I think. I would have liked to have this done sooner but I digress. My goal was this: Install BLtouch clone for automatic bed leveling Install case lights for when all the lights are off in the basement my printer has light for octoprint webcam Install a way to…