Thread to the extruder

tfedder

What is the thread of the input at the top of the extruder (connection to the hose)?

Welches Gewinde hat der Eingang oben am Extruder (Verbindungsstück zum Schlauch)?

Samuel Pinches

Welcome @tfedder,

It is M8, fine thread (1.0mm)

tfedder

Vielen Dank 

Gruß Thomas

tfedder

Kann man die Befestigung für den Schlauch irgendwo kaufen? 

Samuel Pinches

This part is called the "bowden connector". The JGAurora part is rare.

It is available on aliexpress - but it is slow post, and expensive: http://sampin.ch/bowdenali

It is hard to find the right type, needs to have all these features:

• PC4-01
• 4mm through-bore
• M8 fine thread (1.0mm), also written as M8x1
  

Michael Dolp at Inventbox may have some, you can try to message him. He is in Germany.

http://www.inventbox.com/de/

Can be bought from China in bulk here:
https://item.taobao.com/item.htm?spm=a230r.1.14.45.5e575b67wpDG0i&id=520068018592&ns=1&abbucket=9#detail

If Michael wants to order some from China I can help him.

tfedder

Thank you. this helps me an i have ordered the inventbox.

Thank you!!