Please note: the forum is closed.
No new user registrations are accepted. For more info, please click here.
No new user registrations are accepted. For more info, please click here.
DO NOT USE EMERGENCY STOP PLUGIN FOR A5S ON OCTOPRINT OR M112 COMMAND USING STOCK JGAURORA FIRMWARE
SomeoneYouLike
Posts: 38🌟 Super Member 🌟
There seems to be a serious bug with JGAurora newest firmware.
If you are printing something using OctoPrint DO NOT use the Emergency Stop plugin. It will shut off the motors BUT it will keep on the heaters of the extruder and reach extreme high temperatures that can damage PTFE tubing.
Furthermore, DO NOT use the M112 Emergency Stop command on the printer. The above mentioned will happen until JGAURORA releases a fix.
This bug seems to only apply for the A5S. I am not sure about other JGAURORA models.
If you are printing something using OctoPrint DO NOT use the Emergency Stop plugin. It will shut off the motors BUT it will keep on the heaters of the extruder and reach extreme high temperatures that can damage PTFE tubing.
Furthermore, DO NOT use the M112 Emergency Stop command on the printer. The above mentioned will happen until JGAURORA releases a fix.
This bug seems to only apply for the A5S. I am not sure about other JGAURORA models.
Thanked by 1RJ Myers
Comments
https://www.dropbox.com/s/70asrhlu1lc4gfp/JG-A5S-20190521.BIN?dl=0
the M112 command is not offered by Cura/JGCreat so they probably unfortunately overlooked it during development.
Once I have tested it, it will be stickied on the home page to let people know.
Howdy, Stranger!
RegisterIt looks like you've been lurking for a while.
If you register, we will remember what you have read and notify you about new comments. You will also be able to participate in discussions.
So if you'd like to get involved, register for an account, it'll only take you a minute!