Please note: the forum is closed.
No new user registrations are accepted. For more info, please click here.
No new user registrations are accepted. For more info, please click here.
Stops printing mid print
Mookie117
Posts: 7Member
Hi everyone, I need some help. I’m new to 3D printing, but have been successful in making my first few prints. Some supplied with the printer, some I’ve designed. My issue is whatever I try to print now starts but stops printing at some point ( mid- print) no errors on the screen. I’m using the same settings as the prints I was successful on.
Thanks for your help
Thanks for your help
Comments
Its unfortunate that error messages are not shown the LCD. That’s a limitation of the LCD.
I did notice others having similar issues. When it stopped, temp was correct, bed was correct too, fan 0%. I check fan speed in Curia & everything is ok, start up speed is 0, I changed that to 75%. No luck. I then changed the fan speed on the printer to 255 as well as extruder & bed temp to the same as in Cura. Printing a part now seems to be working. Is it proper to set the parameters for temps and fan speed on both the printer and in cura?
Stopped in middle of print again.
Samuel I’ll try what you suggested
Howdy, Stranger!
RegisterIt looks like you've been lurking for a while.
If you register, we will remember what you have read and notify you about new comments. You will also be able to participate in discussions.
So if you'd like to get involved, register for an account, it'll only take you a minute!