Please note: the forum is closed.
No new user registrations are accepted. For more info, please click here.
No new user registrations are accepted. For more info, please click here.
New MKS TFT28 V4.0 for LCD replacement - leveling issue.
kureka
Posts: 3Member
Hi..All,
Currently i replace my LCD MKS TFT28 V3.0 to V4.0..(because the old LCD was broken). Unfortunately during first time leveling the nozzle not goes to 4 corners as usual for A5 heat bed size but just move 4 corners 150mm square only. Can anybody help and guide me how to setting the size of leveling for A5?
- Just newbie in 3D printing world. Thanks.
Currently i replace my LCD MKS TFT28 V3.0 to V4.0..(because the old LCD was broken). Unfortunately during first time leveling the nozzle not goes to 4 corners as usual for A5 heat bed size but just move 4 corners 150mm square only. Can anybody help and guide me how to setting the size of leveling for A5?
- Just newbie in 3D printing world. Thanks.
Comments
Just make sure you leave the baud rate at 4. Our printers use a 250000 bit/s rate.
Howdy, Stranger!
RegisterIt looks like you've been lurking for a while.
If you register, we will remember what you have read and notify you about new comments. You will also be able to participate in discussions.
So if you'd like to get involved, register for an account, it'll only take you a minute!