Please note: the forum is closed.
No new user registrations are accepted. For more info, please click here.
No new user registrations are accepted. For more info, please click here.
How to print at low temperatures?
Hi everyone, this is my first time here . My name is Jaco, I´m spanish living in the Nederlands. I got a A3S in November and I have been playing with it and the diferent softwares for 3d modeling. I have no backup so this months have been quite intense but also funny.
I´m trying to print PCL. The fabricant recomends 100C for this material (I think can be printed even at lover temperatures) but the printer is not working properly. The motor of the extruder remainds quiet even when the head of the printer does move. I have read a little and it may be a protectión of the setings of the printer to avoid extrusion under 187C.
Any idea how to solve this problem?
Kind regards from a rookie.
PD: great web site, I also love the dark theme. I learning a lot and I enjoy it.
I´m trying to print PCL. The fabricant recomends 100C for this material (I think can be printed even at lover temperatures) but the printer is not working properly. The motor of the extruder remainds quiet even when the head of the printer does move. I have read a little and it may be a protectión of the setings of the printer to avoid extrusion under 187C.
Any idea how to solve this problem?
Kind regards from a rookie.
PD: great web site, I also love the dark theme. I learning a lot and I enjoy it.
Comments
Wel I beter cut off. As you ask here is my 3d printer. I have change de tube for a capricorn, I still have some problem with stripping for large volumes and with the adhesion to the bed. I have been reading a lot and I think I,m in the good way to solve them. You can see as wel a lever for the extruder (https://www.thingiverse.com/thing:3601919).
I have ask for this problem to the offical support of aurora and they pointed the same problem that you.
I hope you all a good day,
Jaco
Gowiththeflow
I will try it as soon as I put the machine back to work. Yesterday I was cleaning it from ABS rest and I think I touched the temperature sensor cables. The screen went to black after a electric sock and it hasn´t ricovery since them. Yeah I know, probably I should have switch off the printer right?
Kind corona-free regards
I didn,t use any liquid, just graving the abs with the tweezers. But I think I may have done a contact between the hotter en de temperature sensor (or just break this last one). Any way Im talking with them to get a new printer or to repair this one.
Once I can I will try the new firmware!
I didn,t use any liquid, just graving the abs with the tweezers. But I think I may have done a contact between the hotter en de temperature sensor (or just break this last one). Any way Im talking with them to get a n
Howdy, Stranger!
RegisterIt looks like you've been lurking for a while.
If you register, we will remember what you have read and notify you about new comments. You will also be able to participate in discussions.
So if you'd like to get involved, register for an account, it'll only take you a minute!