Please note: the forum is closed.
No new user registrations are accepted. For more info, please click here.
No new user registrations are accepted. For more info, please click here.
No Consistency
tyakubik08
Posts: 5Member
I have been having issues with practically every print failing. The prints seem to fail at different points every time I try. I have recently upgraded the firmware from the link on this website. I had 2 successful prints after that of the test cube and 1 DnD mini from the SD card. Things seemed to have worked until I tried to print via USB, with Cura 4.8.0. I hadn't change the default settings, causing the nozzle to hit the build plate until it snapped the threaded channel from the extruder to the radiator. I replaced that wit parts from their official site. Now every print fails. The picture is of the test cube failed at 2 separate times. I've tried adjusting the temp settings.
Comments
Howdy, Stranger!
RegisterIt looks like you've been lurking for a while.
If you register, we will remember what you have read and notify you about new comments. You will also be able to participate in discussions.
So if you'd like to get involved, register for an account, it'll only take you a minute!