Please note: the forum is closed.
No new user registrations are accepted. For more info, please click here.
No new user registrations are accepted. For more info, please click here.
JGAraura A3S both temp sensors simultaneously stop working
Dave
Posts: 4Member
I bought a JGAraura A3S yesterday and did 2 successful prints on it without too much hassle (blocked nozzle and then a slow filament leak after messing around with it). I went to do my third print and just after it hit the limit switch on the z axis the print aborted and the heatbed temperature showed 150 and the nozzle showed 136. Switched the printer off and on again, still shows the same temperature. I took the printer apart and unplugged the temp sensors, still showed the same temperature, plugged in a different thermistor for a hotend and another thermistor for a heatbead in, same temperature. I havent tested whether the spare port works yet but it still wouldn't be much good to me without the heated bed temp anyways. Is my motherboard stuffed or is it a software issue? Any help would be greatly appreciated.
Comments
If you want to buy something else, do not buy CRAP from Creality
Howdy, Stranger!
RegisterIt looks like you've been lurking for a while.
If you register, we will remember what you have read and notify you about new comments. You will also be able to participate in discussions.
So if you'd like to get involved, register for an account, it'll only take you a minute!