Please note: the forum is closed.
No new user registrations are accepted. For more info, please click here.
No new user registrations are accepted. For more info, please click here.
JGAurora A5 - Linear rail X - MGN12 - H
jsanch
Posts: 11Member
Good afternoon,
This is my Project to convert the x axis to linear rail.
This is my Project to convert the x axis to linear rail.
Comments
I'd use a mgn12 -h with 400mm length
and I'd include a belt tensioner
It's for a BMG extruder in direct drive.
The dimensión are:
X: 270mm
Y: 285mm
Z: 260mm
I'll trying it and is in beta but it Works!!!
-E3d V6
-Bondtech extruder (right or left) I'd mount the right version and it Works well but i think the left version is better.
-Nema 17 pankcake 24mm.
-30mm barrel fan
-5015 24v layer fan
-MGN12 - H 400mm
The x nema motor, gt2 pulleys and belt are the original of the printer.
Are you still happy with this mod one year later?
I'm thinking to do the same on my own.
Best regards,
Derf;-
Hello, please help your fashion JGAURORA A5-A5S - LINEAR RAIL X - MGN12H
I collected this mod with Bltouch, please help with the firmware of this fashion! I can not configure Configuration files
I installed the TMT 2208 and it seems like everything is fine
But Blotouch can not customize!
Howdy, Stranger!
RegisterIt looks like you've been lurking for a while.
If you register, we will remember what you have read and notify you about new comments. You will also be able to participate in discussions.
So if you'd like to get involved, register for an account, it'll only take you a minute!