Getting Started & Troubleshooting

Discussion List

• Manual for MArlin1.1.8C

  146 views 3 comments 0 points Most recent by Prokktor January 2019
• Connecting via USB cable from computer to a5.

  2.8K views 1 comment 0 points Most recent by Samuel Pinches January 2019
• Hot end crashing into bed after levelling.

  165 views 2 comments 0 points Most recent by James Wardle January 2019
• Shrinkage and warp

  126 views 2 comments 0 points Most recent by Badger1875 January 2019
• Part Cooling Fan does not start at slow speeds

  1.4K views 3 comments 0 points Most recent by Prokktor January 2019
• Cura Profile for the A5 and explanations for the individual settings

  2.9K views 2 comments 0 points Most recent by AON January 2019
• A5 and A5S in fire

  305 views 12 comments 0 points Most recent by Der_Muck January 2019
• Slicing print times

  114 views 7 comments 0 points Most recent by rhaub101 January 2019
• JGAurora A5 Y and Z Axis not working

  99 views 1 comment 0 points Most recent by Samuel Pinches December 2018
• Why Does This Happen?(The first layer)

  94 views 1 comment 0 points Most recent by Der_Muck December 2018
• PETG: unable to print a perfect object

  1.9K views 9 comments 0 points Most recent by compman2 December 2018
• Problems sticking

  185 views 11 comments 0 points Most recent by itisnot_me December 2018
• Getting Prints ABS to stick on bad

  572 views 6 comments 0 points Most recent by Der_Muck December 2018
• Problem with the auto bed leveling (IR probe)

  409 views 13 comments 0 points Most recent by Der_Muck December 2018
• extruder motor to hot?

  643 views 21 comments 0 points Most recent by Der_Muck December 2018
• How do I level the x-axis gantry, and how to do I make the x-axis gantry go lower?

  441 views 2 comments 0 points Most recent by EldestYeti December 2018
• JG Aurora A5 Z-Axis Jamming Problem

  283 views 4 comments 0 points Most recent by Hindawi December 2018
• A5 is not printing full build plate.

  97 views 3 comments 0 points Most recent by Samuel Pinches December 2018
• Filament out Sensor with octoprint on raspberry drives me crazy...

  2.2K views 2 comments 0 points Most recent by Samuel Pinches December 2018
• Loud noise during bed move

  163 views 2 comments 0 points Most recent by Marc December 2018
• [A5]Power supply dying?

  96 views 1 comment 0 points Most recent by SkacikPL December 2018
• Extruder feed not working from touchscreen

  148 views 1 comment 0 points Most recent by Gregor December 2018
• Ludicrous speed

  974 views 2 comments 0 points Most recent by itisnot_me December 2018
• Problem with x-Offest shift shortly after starting printing

  443 views 14 comments 0 points Most recent by Samuel Pinches December 2018
• Printer still printing with no filament flow

  134 views 3 comments 0 points Most recent by Prokktor December 2018
• Beeping: Urgent

  88 views 2 comments 0 points Most recent by Samuel Pinches December 2018
• Printer stops during printing.

  282 views 5 comments 0 points Most recent by Samuel Pinches December 2018
• Re-installing cura 3.6

  64 views 0 comments 0 points Started by rhaub101 December 2018
• PLA residue left on bed after printing too close

  575 views 4 comments 0 points Most recent by Samuel Pinches December 2018
• Heating problem...

  125 views 2 comments 0 points Most recent by Samuel Pinches December 2018